Here is how to use the water brush pens with piston filler:
To fill the brush, first, turn the piston knob at the end of brush handle counter-clockwise. Again, please do not try to separate the handle from the brush head or open the handle. Just turn the knob to move the piston screw downward to drive out the air inside the reservoir.
Dip the brush head into the water and turn the piston knob clockwise.You should see the water is now sucked into the reservoir. Tip: if the reservoir is not full, you may point the brush tip to the sky and turn the knob counter clockwise slowly to push out the air, then, dip it into the water and draw the water again by turning the piston knob clockwise.
The brush is very easy to clean, just squeeze out some water and brush it on a paper towel. Main care tip for the water brushes would be to clean and drain them before storing them when they are not going to be used for a while.
|This article was published on Tuesday 18 August, 2009.|
|Current Reviews: 0|
|1 x||Silk Ribbon for Scroll Mounting sold by the Yard|
|1 x||Xiling Brand Dark-Red Seal Ink Paste Refill Bag 30g|
|1 x||A Seal Imprint Collection of Henry Li(eBook)|
|1 x||Chinese Seal Carving Engraving Knives set of 8|